Total number of Outlets required. * (eg 2,000) In the main, how many outlets per position (eg Are the outlets made up of mainly singles, doubles or quads) If left blank we will assume mainly doubles. Roughly, what is the average distance from cabinet/rack to the outlets m (eg 45 metres) The maximum distance is 90m. If left blank we will assume 50m.This a very important element for the costs. How many cabinets are required (eg Is there more than 1 building or multiple cabinets planned within a building) If left blank we will assume a single cabinet or depending on outlets Electron would also automatically size up the cabinet from the aforementioned information. With regards the routing of the cables from Cabinet/Rack to outlets how best would you describe the environment ? Please select one of: Demountable Suspended Ceiling, Interlocking Suspended Ceiling, Underfloor Cabling, Surface Cabling. If unknown we will assume demountable suspended ceiling. Backbone Cabling (Between Cabinets) If more than one cabinet is required then there will need to be fibre, copper and/or UTP links between them. This really needs a site survey if the information is unknown which obviously Electron can undertake at no cost to yourselves. Alternatively you could call on 0800 458 8800 and ask to speak to an RCDD. Please fill in the following if possible/applicable. Fibre Optic Cabling Are there links required between cabinets/racks Yes No If yes, what size fibre is required Core (eg 4, 8 or 12) If unknown we will assume a 4 core for costing purposes. Adding up the required cable distances between cabinets what would the total distance of fibre be: m If unknown we will assume 60m per link. Copper Cabling (Usually used for telephony PABX services between cabinets) Are there links required between cabinets/racks Yes No . If yes, what size cable is required Pairs (eg 50 , 100 ,150 ) If unknown we will make assumptions based on the amount of outlets required using an industry standard formula to calculate sizes. Adding up the required cable distances between cabinets what would the total distance of cable be: m If unknown we will assume 60m per link. UTP Cabling (Usually for ISDN or resilient back up for fibre links) Are there links required between cabinets/racks Yes No If yes, how many are required (eg 6 , 8, 12 , 24 ) If unknown we will cost based on 6. Adding up the required cable distances between cabinets what would the total distance of cable be: m If unknown we will assume 60m per link. PABX Link (Link from traditional telephone system to main cabinet) Is this required to be costed Yes No If yes, how many telephone ports are required across the site (eg 100, 200 , 300 ) If left blank we will cost based on the other info provided We presume each circuit is 1 pair working if NOT please tick the box Finally, should you feel that there is other 'relevant' information which may affect the costing of the project (such as containment as an example) then please add notes below.
THANK YOU Your Quotation will be emailed to you within 24 hours. Depending on the information supplied it will include : 1 Price for the Category 5e cabling (Including cabinets) 2 Options for: Cat 5e LSOH Cat 6 UTP Cat 6 LSOH Out of Hours working 3 Cost of Fibre and Copper backbone (If applicable) 4 Cost of PABX Link (If applicable) The price will exclude containment (PVC trunking) unless sufficient information is given in the notes section. For small projects of under 100 outlets or for adds moves and changes please call 0800 458 8800 for a verbal quotation.
