[Back To The Homepage]
Many thanks for requesting a Budgetary Intelligent Patching Quotation.

All quotes will be based on a fully installed solution.
Ideally this should be for projects in excess of 500 UTP Outlets.
Not many of the boxes need to be filled in. However please enter as many details as possible below
The more information that is provided, the more accurate the quotation.
The items marked as * are required to enable a response.

You will NOT be contacted unless requested.
We do NOT pass any information to 3rd Parties.

Contact Details :

Name:
*
Company
 *
Tel
 *
Email
 * Please note this must be a company not personal email address.
   
Project Details :
Location
 *
          (eg London)


There are two types of Intelligent Patching scenarios.
One scenario is where structured cabling currently exists and costs are required to 'add-in' an Intelligent system.
This scenario is referred to as a 'Retrofit'.
Any cabling system can be accomodated whether it be Avaya, Krone, Brand Rex,Molex, Mayflex etc.
The other scenario is for a brand new cabling system with 'intelligence' on day one.
There is different information needed to enable a quote based on the type of scenario.

Please enter the relevant information into one of the scenario's.

Retrofit Solution or a NEW solution * One of these MUST be ticked.


Do you want to include the PABX ports in the Intelligent Patching solution Yes No

What is the total number of separate wiring centre locations *
(eg How many rooms with patching cabinets)

Retrofit Solution

Within each wiring centre location please detail the number of existing services (Omit PABX if not required)

  Number of
24 Port UTP Panels		 Number of
Switch Ports		 Number of
PABX Ports		 Number of
Patch Cords
Location 1
Location 2
Location 3
Location 4
Location 5
Location 6
Location 7
Location 8
Location 9
Location 10

If more than 10 locations please add details in the notes.

Please identify the type of cabling system already in place (if known) (eg Avaya,Krone etc)
What type of network management system do you use (eg HP Openview etc)


NEW Solution

If a new cabling solution is being proposed then we would suggest that the information is also filled in the
Request for Structured Cabling ' section.
From that information we would just need to know :-
Number of Switch Ports per location (multiples of 24)
Number of PABX ports to be presented per location (if required)
Total number of patch cords to be deployed.


This information can be filed in the table below :-

  Number of
UTP Outlets **
 Number of
Switch Ports
Number of
PABX Ports
 
Location 1  
Location 2  
Location 3  
Location 4  
Location 5  
Location 6  
Location 7  
Location 8 Total # of
Patch Cords
Location 9
Location 10

** If not already declared on a separate cabling quotation.

If more than 10 locations please add details in the notes.

What type of network management system do you use (eg HP Openview etc)

Finally, should you feel that there is other 'relevant' information which may affect the costing of the
project then please add notes below.

Notes:

THANK YOU

Your Quotation will be emailed to you within 24 hours.
Depending on the information supplied it will include :

1 A total price for the supply, installation and commissioning of an Intelligent Patching system

The price will exclude management of fibre links unless sufficient information is
given in the notes section.

For a no obligation discussion on Intelligent Patching please call FREE on 0800 458 8800
and ask to speak to a RiT certified consultant.